Our products
Daytona/Sonda
| Article No. | Model | Internal Dimension [LxWxH cm] | Gross Weight [kg] | Payload [kg] | Loading Height [cm] | Tyres [Inches] |
| 37113100 | Daytona 1300 | 370 X 210 X 230 | 1300 | 915 | 58 | 13 |
| 37215100 | Daytona 1500 | 362 X 182 X 11 | 1500 | 1085 | 58 | 14 |
| 37318100 | Daytona 1800 | 362 X 182 X 11 | 1800 | 1350 | 58 | 13 |
| 37415100 | Sonda I | 350 X 195 X 4 | 1500 | 1140 | 56 | 10 |
| 37715200 | Sonda I Trike | 350 X 195 X 4 | 1500 | 1100 | 56 | 10 |
| 37525200 | Sonda II | 400 X 195 X 4 | 2500 | 1970 | 56 | 10 |
| 37625200 | Sonda II with wood plate | 400 X 195 X 4 | 2500 | 1970 | 56 | 10 |
| 37825200 | Sonda Cargo | 400 X 200 | 2500 | 1850 | 56 | 10 |
| Article No. | Name | Remark |
| 1414147 | anty-sway coupling | AKS (Sonda II) |
| 141414 | shock absorbers | 1 axle (couple) |
| 1414142 | Spare Wheel + Holder | 165R13 C |
| 1414143 | Spare Wheel + Holder | 185R14C |
| 1414144 | Spare Wheel + Holder | 195/55R10C |
| 37113180 | winch (Daytonas) | incl. Holder |
| 37415180 | winch(Sondas) | incl. Holder |
Standard equipment:
DAYTONA:
- front to run over
- 13-pin plug
- Steel frame screwded, hot dipped galvanised
- V-shaped drawbar
- Ball -coupling
- stand rails made of perforated plate, middle open
- rubber spring axle
- treads ahead and behind the fenders
- tiltbed trailer with gas springs
- tilt angle ca. 12 degree
SONDA:
- Steel frame welded, hot dipped galvanised
- V-shaped drawbar
- Ball -coupling
- steel stand rails made of perforated plate, middle open
- rubber spring axle
- steel drive-up ramps 120 cm long and
- 35 cm wide, between the stand rails
- removable / adjustable front wheel chocks-13-pin plug
- shock absorbers and 100 km/h -approval